See the ice
take shape.
This supplied demonstration moves from the machine controls to a tank, where fine ice crystals become visible in the liquid mixture. Later shots show the texture being sampled with a scoop.
An edited demonstration of the process. Its time labels do not establish a rated output or a project performance result.
One technology.
Different operating demands.
Fine ice crystals suspended in water can be moved through a process. What matters next depends on the job: controlled seafood chilling or a carefully specified pipeline cleaning operation.
Seafood chilling
Explore seawater slurry ice for fishing vessels, landing sites and seafood processing. Match cooling demand to generation, storage and distribution.
- Onboard installation and retrofit
- Fish and shrimp handling
- Process water, temperature and hygiene
Pipeline cleaning
Discuss ice slurry equipment requirements with a defined cleaning process. The same GTM model range supports cleaning configurations, with pumps, storage and controls tailored to the circuit.
- Pipe geometry and deposit assessment
- Slurry concentration and pump control
- Water quality and return-to-service criteria
Find your starting point.
Compare the catalogue ratings and installation envelopes of five GTM models. Output and configuration should be agreed against your actual water, temperature and ice concentration requirements.
| Model | Catalogue output | Compressor rating | L × W × H (mm) |
|---|---|---|---|
| GTM-60 | 2 t/day | 2 HP | 600 × 800 × 1000 |
| GTM-80 | 4 t/day | 4 HP | 680 × 880 × 1350 |
| GTM-100 | 6 t/day | 6 HP | 1200 × 1000 × 1550 |
| GTM-130 | 8 t/day | 8 HP | 1200 × 1000 × 1850 |
| GTM-200 | 12 t/day | 12 HP | 1530 × 1550 × 1480 |
Dimensions are brochure reference values. Confirm orientation, service clearance and the final equipment drawing before installation.
Better inputs.
A more useful quotation.
A daily capacity number is only useful when its test conditions are clear. These three inputs help us understand the system you need.
Your process
Tell us what you handle, the amount per batch or shift, and the required cooling or cleaning outcome.
Your conditions
Share water source, salinity, inlet temperature, available power and installation location.
Your integration
Describe storage, pumping distance, pipework, access and maintenance constraints.
Understand the choices.
Practical guides for comparing cooling methods and preparing an engineering enquiry.
- Slurry ice vs flake ice: what should you compare? ↗Selection guide
- How does ice slurry pipeline cleaning work? ↗Process guide
- What does an onboard installation need? ↗Application guide
Glass-tube cleaning.
Defined around your circuit.
Discuss a custom ice slurry arrangement for algae cultivation tubes. Start with the tube geometry, deposits, liquid requirements and operating limits, then agree a representative trial.
Meet the factory.
Zhejiang Hongye Equipment Technology Co., Ltd., Wenling, Zhejiang. Explore the company and its equipment exhibition archive.
About GTMICE · Exhibition photographs · Company announcements